Changing A Light Bulb - Baumatic MG3 Instruction Manual

90cm cooker hood
Hide thumbs Also See for MG3:
Table of Contents

Advertisement

Changing a light bulb

IMPORTANT: BEFORE ATTEMPTING TO CHANGE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
o Using a flat tipped screwdriver, remove the bulb and
insert a new GU4 12V 20W (max) bulb.
o IMPORTANT: Defective bulbs should be replaced
immediately.
o If the light or lights still do not work, make sure that the lamps
are fitted properly into their housings before you call for
technical assistance.
o If the lights still do not work, make sure that the lamps are fitted
properly into their housings before you call for technical
assistance.
o Prior to touching the light bulbs
ensure they are cooled down.
o Find the bulb that requires
replacement, you will find it located
in the light fixture which is on the
underneath of the cooker hood.
o Refit the grease filters.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

P35ssSb3Tg3

Table of Contents