Connecting To External Ducting - Baumatic MG3 Instruction Manual

o IMPORTANT: You must fully tighten these screws, as they
assist in fixing the hood to the wall.
Electrical connection
The electrical connection must correspond to the electrical requirement
noted on the rating plate, which is placed inside the cooker hood. The
appliance should be connected to the electrical supply. See page 16 –
17 for detailed information on the electrical connection.
Refit the grease filters and then switch on the mains
supply to the appliance. Press the ON/OFF button and
check that the appliance is operating correctly.

Connecting to external ducting

12) Connect the coupling to the top of the cooker hood, and then
connect a 125 mm ducting hose to the coupling. Please note that the
ducting hose is not supplied with the appliance. *
o The other end of the ducting hose should be connected to your
discharge outlet that is suitable for cooking vapours. It should
have a cross section of at least 150 cm².
o The maximum distance between the coupling and your discharge
outlet should be 3 metres, with one 90 degree bend.
* It is possible to purchase a ducting kit from the Baumatic Spares
Department (either the DK5 or DK10).
24