Installing Your Cooker Hood - Baumatic MG3 Instruction Manual

Installing your cooker hood

o The cooker hood should not be exposed to a direct heat source
from the cooking device underneath it, i.e. naked flame from a
gas burner or heat from electric hob zones without a pan on
them.
o We recommend that at least two people install this hood.
o The lights on this appliance should only be used during operation
of the cooker hood. They should not be left on permanently and
used as a lighting source.
IMPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED TO
YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
2) The mounting bar that you hang the hood onto is screwed to the
back of the appliance. You will need to undo the screws that attach
this bar to the back of the cooker hood from the inside of the
appliance. There is a screw on either side of the cooker hood's motor.
1) Open the cover screen and remove
the metal grease filters.
3) Measure a distance of 700 mm from t
hob top that will be underneath the cook
hood. Then measure out a further 518 mm
above this height.
he
er
20