Table of Contents
Advertisement
o Use the ON/OFF button to switch the cooker hood on.
o Use the plus and minus buttons to regulate the speed that the
motor is running at.
o The speed level that you have selected will appear on the LCD
display.
o To switch the cooker hood off, press the ON/OFF button.
o When you next switch the hood on, it will remember the speed
that it was running at when it was last used.
The timer button
o If you press the timer button whilst the cooker hood is in
operation, then it will countdown for 15 minutes.
o During the countdown the number on the LCD display will flash.
o When the countdown has finished the cooker hood will switch
off.
o If you press either the plus or minus button during the
countdown, the cooker hood will return to normal operation.
Grease filter maintenance alarm
o After approximately 30 hours of operation, the timer button will
glow red. This means that the grease filters need to be cleaned.
o You should follow the grease filter cleaning operation that is
outlined on pages 11-13 of this instruction booklet.
o When the grease filters have been put back in position, turn on
the hood and then hold down the timer button until the red light
goes out.
o Turn the hood off and then back on again, to check that the
alarm has been reset.
IMPORTANT: TO MAINTAIN THE CORRECT
FUNCTIONING OF THE CONTROL PANEL, WE
RECOMMEND THAT YOU REGULARLY CLEAN THE
FRONT OF THE GLASS.
10
Advertisement
Table of Contents
