Ac Operation - Honda EB12D Owner's Manual

AC Operation
1. Check GFCI operation before each use (see page 14).
2. Start the engine (see page 32).
3. Make sure that the GFCI RESET button is pushed in (flush with its
base plate).
4. Switch ON the AC circuit breaker.
5. Plug in the appliance.
Most motorized appliances require more than their rated wattage for
startup.
GFCI RESET BUlTON
AC CIRCUIT BREAKER
Do not exceed the current limit specified for any one receptacle. If an
overloaded circuit causes the AC circuit breaker or circuit protector to
switch OFF, reduce the electrical load on the circuit, wait a few minutes
and
then reset the circuit breaker.
21