Ac Operation - Honda EU7000is Owner's Manual

OPERATION

AC OPERATION

If an appliance begins to operate abnormally, becomes sluggish, or
stops suddenly, turn it off immediately. Disconnect the appliance, and
determine whether the problem is in the appliance or the rated load
capacity of the generator has been exceeded.
Substantial overloading that continuously lights the red OVERLOAD
indicator may damage the generator. Marginal overloading that
temporarily lights the red OVERLOAD indicator may shorten the service
life of the generator.
1. Turn the voltage selector switch to either position.
With the voltage selector switch in the ''120 V/240 V'' position, you
can use the 120 V and 120 V/240 V receptacles simultaneously. If
you are NOT using the 120 V/240 V receptacle, then select the
''120 V ONLY'' position.
2. Start the engine and make
sure the green OUTPUT
indicator comes on.
38
VOLTAGE SELECTOR SWITCH
OUTPUT INDICATOR (GREEN)
120 V/240 V
120 V ONLY