Controls; Engine Switch - Honda EB12D Owner's Manual

CONTROLS
Engine Switch
To start and stop the engine.
Key position:
OFF:
ON:
START:
To stop the engine. Key can be removed/inserted.
To run the engine after starting.
To start the engine by turning the starter motor. Return
the key to the ON position once the engine has started.
Do not use the starter for more than 5 seconds at a time.
If the engine fails to start, release the switch,and wait 10
seconds before operating the starter again.
m Make sure the engine switch is set to the OFF position when the
engine is stopped. The charge warning light will come on if the switch is
left in the ON position with the engine not running. The battery may
discharge if the engine switch is left in the ON position with the engine not
running.
ON
9