Stopping The Engine With Bluetooth® Enabled Smartphone; Ac Operation - Honda EU32i Owner's Manual

STOPPING THE ENGINE with
The engine can be stopped via a Bluetooth® enabled smartphone using a
Bluetooth® application.
Refer to the Bluetooth® application to check the connection, operation, and for
help pairing a smartphone.

AC OPERATION

If an appliance begins to operate abnormally, becomes sluggish, or stops
suddenly, turn it off immediately. Disconnect the appliance, and determine
whether the problem is in the appliance or the rated load capacity of the
generator has been exceeded.
• Substantial overloading that continuously lights the overload alarm indicator
(red) may damage the generator. Marginal overloading that temporarily lights
the overload alarm indicator (red) may shorten the service life of the generator.
• Be sure that all appliances are in good working order before connecting them to
the generator. Electrical equipment (including lines and plug connections) should
not be defective. If an appliance begins to operate abnormally, becomes sluggish,
or stops suddenly, turn off the generator engine switch immediately. Then
disconnect the appliance, and examine it for signs of malfunction.
The generator produces enough electric power to cause a serious shock or
electrocution if misused.
Be sure to ground the generator when the connected appliance is grounded.
To ground the terminal of the generator,
use a copper wire with same or larger
diameter than the cord of the connected
appliance.
Use extension cord set with ground conductor when connecting an appliance
with ground conductor.
To identify the Ground pin in the plug, see Receptacle page 75.
® ENABLED SMARTPHONE
GROUND TERMINAL
OPERATION
EARTH
MARK
43