Engine Oil Change - Honda EB12D Owner's Manual

Engine Oil Change
Drain the oil while the engine is warm to assure complete and rapid
draining.
1. Open the maintenance cover (see page 23).
2. Remove the oil filler cap and drain bolt to drain the oil.
3. After draining is complete, check that the sealing washer is in good
condition (replace if necessary), then retighten the drain bolt securely.
4. Refill with the recommended engine oil and check the oil level with
the oil level gauge (see page
24).
5. Install the oil filler cap.
6. Start the engine and allow it to warm to normal operating temperature.
Stop the engine and recheck the oil level with the oil level gauge (see
page 24). Add if necessary.
OIL FILLER CAP
GAUGE
OIL GRAIN BOLT
ENGINE OIL CAPACITY: 4.8 lit. (5.0 US qt. 4.2 Imp qt)
Please dispose of used motor oil and the oil containers in a manner that
is compatible with the environment. We suggest you take used oil in a
sealed container to your local service station for reclamation. Do not
throw it in the trash or pour it on the ground.
43