Integrated Devices Screen - Dell PowerVault DL2100 Hardware Owner's Manual

Option
Boot Sequence Retry
(Disabled default)

Integrated Devices Screen

Option
Integrated SAS/RAID
Controller
(Enabled default)
User Accessible USB Ports
(All Ports On default)
Internal USB Port
(On default)
Internal SD Card Port
Embedded NIC1 and
NIC2
Embedded NIC3 and
NIC4
Embedded Gb NICx
(NIC1 default: Enabled
with PXE;
Other NICs: Enabled)
MAC Address
Capability Detected
62
Using the System Setup Program and UEFI Boot Manager
Description
If this field is enabled and the system has failed to boot,
the system will reattempt to boot after 30 seconds.
Description
Enables or disables the integrated storage controller.
Enables or disables the user-accessible USB ports.
Options are All Ports On, Only Back Ports On, and All
Ports Off.
Enables or disables the internal USB port.
Enables or disables the internal SD card port.
Enables or disables the OS interface of the four
embedded NICs. (The NICs may also be accessed
through the system's management controller.)
Enables or disables the embedded NICs. Options are
Enabled, Enabled with PXE, Enabled with iSCSI Boot,
and Disabled. PXE support allows the system to boot
from the network.
Displays the MAC address for the NIC.
Displays the features of the NIC hardware key, if
installed.
NOTE:
Some NIC features may require the installation of an
additional driver.