Table of Contents
Advertisement
Mount Jack Panel Boxes
Mount the jack panel boxes near the controller, creating a "jack field." You will need one
jack panel box for every six telephones in your system. Ideally, the jack field will be
two to six inches below the controller if the controller is wall-mounted.
Mounting screws for the jack panel boxes are included in the kit. If you are installing the
boxes on a sturdy supporting structure, such as studs or cross members, attach the boxes
directly to the walls. If the walls are hollow, mount the jack panel boxes on a board
that is about two inches larger all around than the complete jack field (all the boxes
mounted together). Then, mount the board on the wall.
Mount the jack
panel box with
the screws provided
or fasteners
appropriate for
your walls.
8
Customer Installation Instructions
Mesh the tongue and
groove of another jack
panel box with the first.
Mount the second box.
Black dot
Snap six modjack-to-modjack
adapters into each jack retainer.
Position the black dot on the left.
Advertisement
Table of Contents
