Table of Contents
Advertisement
With PARTNER Remote Administration, you can change the date and time setting on your
PARTNER system. To ensure that you do not inadvertently change these settings, this
change can only be made while you are connected to the system. The new date and time
will be activated immediately. It does not require you to restore information to the system.
To change the date and time:
Connect to the PARTNER system.
1
2
On the Administration menu, select Date and Time.
You will see your PC's date and time settings displayed.
Click Retrieve.
3
The date and time of the PARTNER system will now be displayed.
Change the date or time as necessary.
4
Click Set.
5
The new date and time is sent to the PARTNER system.
Click Close.
6
Disconnect from the PARTNER system (optional).
7
You can also retrieve the system date and time at any point. For troubleshooting
purposes, you may need to check this information, but you may not wish to make a
change. In this case, follow Steps 1 through 3, and then go to Step 6.
Administering Date and Time
A d m i n i s t e r i n g D a t e a n d T i m e
7
27
Advertisement
Table of Contents
