Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual page 55

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance
Using SPM
Assign or remove the module from the slot entered in Step 3.
! 
To remove the module type from the specified slot number, press
The Boards menu reappears.
To assign the module type to the specified slot number and assign that same
module type to another slot, press
To assign the module type to the specified slot number and assign a different
module type to another slot, press
To terminate the procedure and assign a different module, press
) and repeat Steps 2 through 4.
(
To view types of modules assigned to all slots, press
Save your entry.
! 
Select
The programming session terminates and the system restarts.
Browse
The Browse option allows you to browse through reports saved in the Reports
directory (\spm\reports) on the hard disk of the PC or on a floppy.
.
module name = option selected in Step 2
nn = slot entered in Step 3
( ).
( ).
Issue 1
February 1998
Page 41
(
( ).
).