Your 2500 Ymgl Telephone - Lucent Technologies MERLIN LEGEND Release 3.1 Single-Line Telephone User Manual

Your 2500 YMGL Telephone

Switchhook
Press to disconnect a call. See p. 3 for details.
Ringer Volume Switch (on bottom of phone)
Three-position switch for turning ringer OFF, LO,
or HI.
Dial Pad
The numbered buttons, along with and #, that are
used to dial telephone numbers and feature codes.
Message Light
Red light flashes to indicate you have a message.
Hold Light
Red light goes on when you have pressed the
Hold button.
!
CAUTION:
To clean your phone, unplug it from the wall jack and use a slightly dampened
cloth. To prevent permanent damage, do not immerse the phone in water or any
liquid and do not use liquid or aerosol cleaners directly on the telephone.
2
Note for Users of the 2500 MMGL: The 2500
MMGL telephone is intended only for making and
receiving calls (for example, at a fax machine). It has
a positive disconnect switch, which should be turned
on. When positive disconnect is on, the phone can
not use Hold, Transfer, or Conference features.
Mute
Press to turn handset on/off so that you can/cannot
be heard by caller.
Tone-Pulse Switch (on bottom of phone)
Two-position switch for either tone or pulse
operation.
Positive Disconnect Switch (on bottom of phone)
Two-position positive disconnect switch must be in
the one (1) position.
Flash
Press and release to activate a feature. See pp. 3
and 9 for details.
Redial
Dials last number entered from dialpad.
Hold
Press to put a call on hold. See pp. 3 and 9
for details.