Intended Use; Operating Instructions - Dremel 8300 Manual

DM 2610011834 07-10:DM 2610011834 07-10.qxp 7/20/10 1:20 PM Page 10
Thank you for purchasing the Dremel
Cordless Multi-Max Oscillating Tool.
This tool was designed to tackle home repair,
remodeling and restoration projects. The
Dremel Cordless Multi-Max tackles tasks that
are tedious, time consuming or simply next
to impossible to achieve with any other tool.
The ergonomic housing is designed for you
to hold and control in a comfortable manner
during operation.
It comes with an assortment of accessories
that are specifically designed for remodeling
work where you need precision and control.
Your Dremel Cordless Multi-Max has a
robust electric motor, is comfortable in the
hand, and is made to accept a large variety
of accessories including flush cut blades,
scraper blades, grout removal wheels and
sanding pads.
LEARNING TO USE THE TOOL
Getting the most out of your cordless
oscillating tool is a matter of learning how to let
the speed and the feel of the tool in your hands
work for you.
The first step in learning to use the tool is to
get the "feel" of it. Hold it in your hand and feel
its weight and balance (Fig. 5). Depending on
the application, you will need to adjust your
hand position to achieve optimum comfort and
control. The unique comfort grip on the body of
the tool allows for added comfort and control
during use.
When holding the tool, do not cover the air
vents with your hand. Blocking the air vents
could cause the motor to overheat.
IMPORTANT! Practice on scrap material first
to see how the tool's high-speed action
performs. Keep in mind that your tool will
perform best by allowing the speed, along with
the correct accessory, do the work for you. Be
careful not to apply too much pressure.
Instead, lower the oscillating accessory lightly
to the work surface and allow it to touch the
point at which you want to begin. Concentrate
on guiding the tool over the work using very
Questions or Problems? Call 1-800-437-3635
Introduction

Operating Instructions

or check our website at www.Dremel.com
Accessories come in a variety of shapes and
permit you to do a number of different jobs.
As you become familiar with the range of
accessories and their uses, you will learn just
how versatile your Dremel Cordless Multi-
Max is.
Visit www.dremel.com to learn more about
what you can do with your Dremel Cordless
Multi-Max.

INTENDED USE

This Dremel Cordless Multi-Max Tool is
intended for dry sanding of surfaces, corners,
edges, for scraping, for sawing soft metals,
wood and plastic components, and for grout
removal using the applicable tools and
accessories recommended by Dremel.
little pressure from your hand. Allow the
accessory to do the work.
Usually it is better to make a series of passes
with the tool rather than to do the entire job
with one pass. To make a cut, for example,
pass the tool back and forth over the work. Cut
a little material on each pass until you reach
the desired depth.