Specifications; Intended Use - Dremel Ultra-Saw US20V Operating/Safety Instructions Manual

Model
Voltage
Rated speed*
Max. abrasive wheel diameter*
Wheel arbor
Max. cutting depth
* Accessory speed rating must be equal to or greater than the tool's speed rating. Do not
exceed the recommended wheel diameter.
Please refer to the battery/charger list, included with your tool.
Thank you for purchasing the Dremel
US20V.
This tool was designed to tackle a wide
variety of projects in and around the
home. The Dremel US20V completes
tasks quicker and more efficiently than a
series of other tools that would be
needed to complete a job or project.
This tool is also compact, ergonomic,
and cuts common materials at just a
fraction of the size of a traditional
circular saw. With a full line of
accessories the tool cuts through
virtually any common material in the
home- wood, plastic, metal, drywall and
This Dremel US20V tool is intended for
straight cuts in wood, plastic, metal,
drywall, fiberboard, and tile using the
applicable accessories recommended by
Dremel. Additional applications such as

Specifications

US20V
18V/20V
n 15,000/min
4" (102 mm)
.433" (11 mm)
3/4" (21.5 mm)
Battery Packs/Chargers
Introduction
tile. The tool also features two cutting
wheel positions, one position using a
standard flat wheel for all your typical
straight cuts and a second position for
making flush cuts along flooring or
against a wall.
In addition to versatility, the Dremel
US20V provides excellent line of sight
for confident, precise cuts so you will
get accurate cuts the first attempt and
avoid wasting time or material.
Visit www.dremel.com to learn more
about what you can do with your new
Dremel tool.

Intended Use

cutting masonry, flush cutting wood,
and surface preparation of concrete or
thinset
accomplished
separately).
-12-
Max.
removal can
(accessories
be also
sold