Setting Up A Conference Call - AT&T Merlin II Feature Module 2 User Manual

Setting Up a Conference Call

You can set up a conference call that includes people in
and outside the MERLIN II system.
To set up a conference call:
1 With one of the people already on the line, tell the
person you're putting him or her on hold.
2 Press the switchhook down firmly and then release it
(one switchhook flash).
You hear the intercom dial tone.
3 Dial the second call.
4 Take the appropriate step:
— lf you get an answer, press the switchhook down
firmly and then release it (one switchhook flash)
to add the person on hold to the call.
— If you get a busy signal or no answer, press the
switchhook down firmly and then release it twice
(two switchhook flashes) to be reconnected with
the first party.
14