Set Up Speakers - Denon AVR-591 Owner's Manual

2.1-channel/2-channel connection
FL
SW
2-channel connection
For 2-channel playback, disconnect the
subwoofers.
Remote control operation
buttons

Set up speakers

Connect
Here we describe how to set up speakers other than 5.1-channel speakers.
For the method of setting up 5.1-channel speakers, see "Simple version", "Set up speakers (Audyssey ® Auto Setup)" (vpage 6).
First install and connect the speakers to this unit.
1
the remote control unit
n Set up the operation mode
Press AMP
control
operation mode.
FR
Press AMP
Move the cursor
(Up/Down/Left/Right)
2
Connect the setup microphone.
Set up
to set the remote
unit to amplifier
When the setup microphone is
connected, the following screen is
displayed.
3-1.Audyssey Auto Setup
Please place microphone
at ear height at
main listening position.
[ENT]:Select [RTN]:Back
3
Use
ui
3-1.Audyssey Auto Setup
Please place microphone
at ear height at
main listening position.
Confirm the setting
around items indicate the settings.
4
Use o
configuration of the connected
speakers.
Normal
Front Height
MultEQ
5
Proceed to page 8
" Preparation
Pre Assign:
Normal
Start
NOTE
Cancel
After performing Audyssey Auto Setup,
do not change the speaker connections or
to select "Pre Assign".
subwoofer volume. In event of a change,
perform Audyssey Auto Setup again.
MultEQ
Pre Assign:
Normal
Start
Cancel
[RTN]:Back
Return to previous menu
ENGLISH
p to select the
Set for connecting the
surround Back speakers to
the SURR. BACK/FRONT
HEIGHT connector in PRE
OUT.
Set for connecting the
front height speakers to
the SURR. BACK/FRONT
HEIGHT connector in PRE
OUT.
" step 5.
29