Removing The Lens; Lens Range - Barco iD H250 Owner's Manual

Image 3-3
Note: In case of a motorized lens the female jack must be in front of the male jack located in the upper-left part of the housing
in the projector
3. Push carefully to lock the lens in the housing
3.3

Removing the lens

How to remove the lens ?
1. Unlock the lens by pulling the handle located on the right side of the projector
Image 3-4
2. Remove the lens out of its housing
C
AUTION
Always remove the lens before transporting the projector.
3.4

Lens range

Overview table
Lens
QCLD (0.85:1)
QCLD (1.1-1.3:1)
CLD (1.2-1.6:1)
R59770079 BARCO ID H250/500 23/07/2007
:
Never transport the projector with the lens mounted on it !
Image 3-5
location of the lens handle
Partnumber
R9849860
R9849850
R9849870
3. Installation
9