Troubleshooting; Using The Osd - Barco iD H250 Owner's Manual

10. TROUBLESHOOTING

10.1 Using the OSD

What can be done ?
The projector bus allows the diagnostic of different hardware components divided in two main groups.
• I C diagnostics : a number of internal electronic boards can be diagnosed and a graphical interface shows whether there is an
2
error
• Lamps and power supply : lamp temperature and power related failures are logged and can be checked at any time.
How to display the I
1. Press MENU to activate the Tool bar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Press ENTER to select I
Image 10-1
A textbox is displayed
How to display the Lamps and power supply menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Press ENTER to select Lamps and power supply
Image 10-2
A textbox is displayed
Image 10-3
R59770079 BARCO ID H250/500 23/07/2007
C diagnostics menu ?
2
C
2
10. Troubleshooting
99