Basic Operations - Ameriphone ER Telephone User Manual

Setting up Your ER
3. Plug in the short phone line
cord and mount the phone
as shown in Figure 7.
Figure 7 - Wall Mounting Installation
4. See Desktop Use section and
follow steps 1 through 3.

Basic Operations

The ER Is Ready to
Use Right Out of the Box
Your Emergency Response
Telephone comes ready to use
right out of the box. All you have
to do is plug the phone in,
program your emergency contact
phone numbers (up to six contacts,
but at least one is needed). It has
already been pre-programmed at
the factory with the features listed
below.
1. Upon plug-in, the unit will say -
"The unit is ready."
2. A pre-recorded emergency
voice message saying -
"Emergency, Emergency. This
person is having a serious
emergency at home. Please
contact them at once.
Press a key to acknowledge."
3. The Remote Audio Monitoring
Access Code is 1,2,3.
4. The Inactivity Timer is set to
OFF.
E
N
G
L
I
S
H
9