To Adjust Volume And Tone Clarity - Ameriphone ER Telephone User Manual

Basic Operations

To Adjust Volume and Tone Clarity

1. Press the AMPLIFY button as
shown in Figure 8 to turn the
incoming voice amplifier on or
off. When AMPLIFY is on, the
AMPLIFY indicator comes on.
Figure 8 - AMPLIFY Button and Indicator
2. Adjust the volume in the
handset by moving the VOL
slide control in Figure 9. With
AMPLIFY on, incoming volume
will be up to 30 dB louder.
Figure 9 - Volume Slide Control
10
0 #
P
E
HOLD PROG/FLASH SPEAKER REDIAL/PAUSE
AMPLIFY
TONE
LO HI
0
* #
E
HOLD PROG/FLASH SPEAKER REDIAL/PAUSE
AMPLIFY
TONE
LO HI
3. Slide the TONE control left or
right to achieve the word clarity
that's best for you.
Figure 10 - Tone Slide Control
VOL
Caution: Repeated incremental
exposure to amplification levels
greater than 18 dB may be
harmful to individuals without
hearing disabilities. Therefore, do
not remove the warning label
attached to the back of the
handset. If it is likely that a
visually impaired person will use
the telephone, securely attach the
provided warning printed in
Braille to the back of the handset
VOL
(See, Diagram A).
Diagram A.
0 #
*
E
HOLD PROG/FLASH SPEAKER REDIAL/PAUSE
AMPLIFY
TONE
LO HI
VOL