DFI LanParty nF4 User Manual page 80

3
BIOS Setup
Sector
This field displays the number sectors per track.
Drive A and Drive B
These fields identify the types of floppy disk drives installed.
None
360K, 5.25 in. 5-1/4 in. standard drive; 360KB capacity
1.2M, 5.25 in. 5-1/4 in. AT-type high-density drive; 1.2MB capacity
720K, 3.5 in.
1.44M, 3.5 in. 3-1/2 in. double-sided drive; 1.44MB capacity
2.88M, 3.5 in. 3-1/2 in. double-sided drive; 2.88MB capacity
Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
No Errors The system boot will not stop for any errors detected.
All Errors The system boot will stop whenever the BIOS detects
All, But Keyboard The system boot will not stop for a keyboard
All, But Diskette
All, But Disk/Key
Base Memory
Displays the amount of base (or conventional) memory installed in
the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or 640K
for systems with 640K or more memor y installed on the
motherboard.
80
No floppy drive is installed
3-1/2 in. double-sided drive; 720KB capacity
a non-fatal error.
error; it will stop for all other errors.
The system boot will not stop for a disk error;
it will stop for all other errors.
The system boot will not stop for a disk or
keyboard error; it will stop for all other errors.