DFI LanParty nF4 User Manual page 52

2
Hardware Installation
4. When the system powers-up, the NVRAID BIOS status message
screen will appear. Press the <F10> key to enter the utility. The
utility allows you to build a RAID system on Serial ATA drives
and Parallel ATA drives.
5. Install the NVRAID driver.
If you are in the process of installing Windows
Windows
need the provided nVRAID driver floppy diskette. If you are
installing the driver on existing Windows
2000, install the NVIDIA Windows nForce Drivers that is in the
provided CD.
For steps 1 to 4, refer to chapter 3 for more information. For step
5, refer to chapter 4 for more information.
Four Serial ATA ports supported by the Silicon Image Sil 3114
chip (for "DR" models only)
-
-
Connecting Serial ATA Cables
Connect one end of the Serial ATA cable to the Serial ATA
connector and the other end to your Serial ATA device.
52
®
2000 on RAID configured Serial ATA drives, you will
SATA speed up to 1.5Gb/s
RAID 0, RAID 1, RAID 0+1 and RAID 5
®
XP or Windows
1
1
1
1
1
®
XP or
®
SATA 8
7
(J29)
SATA 7
7
(J28)
SATA 6
7
(J27)
SATA 5
7
(J26)