DFI LanParty nF4 User Manual page 100

3
BIOS Setup
Power-On By Alarm
Enabled
Disabled Disables the automatic power-on function. (default)
Day (of Month) Alarm
0
1-31
Time (hh:mm:ss) of Alarm
This is used to set the time you would like the system to power-on.
100
When Enabled, you can set the time you would like the
Soft Power Down (Soft-Off) PC to power-on in the
"Time (dd:hh:mm) of Alarm" field. However, if the
system is being accessed by incoming calls or the net-
work prior to the time set in the field, the system will
give priority to the incoming calls or network.
The system will power-on everyday according to the
time set in the "Time (hh:mm:ss) Alarm" field.
Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the "Time (hh:mm:ss) Alarm" field.