DFI LanParty nF4 User Manual page 101

PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
The settings on the screen are for reference only. Your version
may not be identical to this one.
Init Display First
This field is used to select whether to initialize PCI Express or PCI
first when the system boots.
PCIEx When the system boots, it will first initialize the PCI
Express x16 graphics card.
PCI Slot When the system boots, it will first initialize PCI.
Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
Disabled The BIOS will not reset the configuration data.
3
BIOS Setup
101