Navigating The Eq Sections - dbx DriveRack 480 User Manual

DriveRack
Navigating the "EQ and Notch Filter Sections"
To edit the parameters of the EQs and Notch Filters used in a selected program, simply use the following procedure. From program mode,
either press the EQ button or use the Parameter 2 or 3 knobs to move to EQ module to be edited. Once you have reached the desired EQ,
press the Parameter 2 or 3 knob. Successive presses of the EQ button will move through each channel (input or output) that utilizes an EQ module.
Navigate throughthe Pages of the selected EQ section by pressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
The EQ button
toggles through
the EQs or notch
filters used in
each channel of
the selected
program
menu.
The PARAMETER knobs are used
®
™
EQ
EQ
On/Off
GEQ
Flat Set/Undo
EQ
EQ On/Off
PEQ
Type
Flat Set/Undo
EQ
Band 5 Freq
Q
Level
Notch On/Off
NOTCH
EQ
EQ
On/Off
PEQ
Type
Flat Set/Undo
to edit parameter values
Editing Functions

2.6 Navigating the EQ Sections

Boom
Frequency
Zizz
Level
Band 1 Freq Band 2 Freq
Slope Q
Level Level
Band 6 Freq Band 7 Freq
Q Q
Level Level
Notch 2 Freq
Notch1 Freq
Q Adjust
Q Adjust
Level
Level
Band 1 Freq Band 2 Freq
Q Adjust
Q Adjust
Level Level
1
2
DriveRack™ User Manual
Section 2
Band 3 Freq Band 4 Freq
Q Q
Level Level
Band 9 Freq
Band 8 Freq
Band 9 Freq
Q Slope
Slope
Level Level
Level
Post XOVER
Band 3 Freq Band 4 Freq
Q Adjust Q Adjust
Level Level
3
17