DriveRack
Navigating the "Dynamics" Section
To edit the parameters of the Dynamics module used in a selected program, simply use the following procedure. From program mode,
either press the X-OVER button or use the Parameter 2 or 3 knobs to move to the Dynamics module. Once you have reached the Crossover module,
press either Parameter button to enter the module. Successive presses of DYNAMICS button will move
through each channel that utilizes a Dynamics module. Navigate through the Pages of the selected Dynamics module by pressing the
The DYNAMICS button
toggles through
the Dynamics
modules used in
each channel of
the selected
program.
The PARAMETER knobs are used
to edit parameter values
®
™
"Next Page" or "Prev Page" buttons successively until you arrive at the desired Page.
DYNAMICS
Compressor
DYNAMICS
Peakstop
Over Easy
1
Editing Functions
2.10 Navigating the Dynamics Section
Dynamics (Mono Compressor)
Threshold
Ratio
Gain
2
3
DriveRack™ User Manual
Section 2
21