Entering Security Password; Program Change Mode - dbx DriveRack 480 User Manual

Section 6

6.4 Entering Security Password

DriveRack™ User Manual
54
Utilities
UTILITY
Password
Parameter 1
Password:
Parameter 2
Name
Parameter 3
• Rotate the PARAMETER 2 knob to set the cursor position and rotate the PARAMETER 1
wheel to select characters. To shift characters, press the PARAMETER 1 knob.
• Once you are satisfied with your security password, simply press the STORE button to enter
the new password. You can press the Program button at any time to cancel this procedure.
• Note that security passwords can be changed only by the high security user.
Since the security system has three levels (high,med,low), there can be three different levels of
users accessing the unit. The high security password user can change/lockout all modules and
users, while the medium security password user has access to limited modules and functions
and the user with low access will not have access to any modules with security settings with a
security clearance high or medium.
UTILITY
Password
Parameter 1
Password:
Parameter 2
Name
Parameter 3
• From Program mode, press the UTILITY button and move to page 3 and the display will
appear something like this:
UTILITY
Password
Parameter 1
1 Enter Password
Parameter 2
Parameter 3
Whll: Character Select
Whl2: Cursor Position
Btn2: Character Shift
p3:11
Whll: Character Select
Whl2: Cursor Position
Btn2: Character Shift
p3:11
p3:11
DriveRack
® ®
™