Front Panel (442) - dbx DriveRack 480 User Manual

™
DriveRack
SECTION 1
Getting Started
Outputs 1-4
The output section of the 442 DriveRack™ offers four electronically balanced XLR connectors.
Inputs 1-4
The input section of the 442 DriveRack™ offers four electronically balanced XLR connectors.
The four XLR inputs of the 442 DriveRack™ also offer Pin 1 lift switches which lift the ground
of the selected XLR input pair when pressed.

1.8 Front Panel (442)

PC Connection
This DB-9 type connection is used to send and receive information to and from the GUI inter-
face.
Program Up and Down
These program up and down buttons are used to scroll through the
program menu of the 442.
Program Display
This program display is used to indicate the currently selected program of the 442.
ID Display
This ID display is used to indicate the current assigned identification of the 442. This identifi-
cation is essential for unit recognition when the 442 is used in a network system.
Control Bus LED
This LED (when lit), indicates that the 442 is connected to the control
bus. When it is flashing, the 442 is sending/receiving network infor-
mation.
Remote LED
This LED (when lit), indicates that the 442 is connected to the 480R.
When it is flashing, the 442 is sending/receiving information from the
480R.
PC LED
This LED (when lit), indicates that the 442 is connected to the PC.
When it is flashing, the 442 is sending/receiving information from the
PC.
®
DriveRack™ User Manual
10