Section 2
2.9 Navigating the Delay
Navigating the "Delay" Section
To edit the parameters of the Delay and Speaker Alignment Delay used in a selected program, simply use the following procedure.
From program mode, either press the DELAY button or use the Parameter 2 or 3 knobs to move to Delay module to be edited.
Navigate through the Pages of the selected Delay module by depressing the "Next Page" or "Prev Page"
The DELAY button
toggles through
the Delay
modules used in
each channel of
the selected
program
menu.
The PARAMETER knobs are used
to edit parameter values
DriveRack™ User Manual
20
Editing Functions
buttons successively until arriving at the desired Page.
DELAY
Delay
On/Off
DLY
Type
Length
DELAY
Delay On/Off
DLY
Type
Length
1
DriveRack
Speaker Alignment Delay (Post X-OVER)
2
3
™
®