Configuring AAA Services on Cisco IOS XR Software
Command or Action
Step 6
Repeat Step 5 for each task group to be associated with
the user group named in Step 2.
Step 7
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-ug)# end
or
RP/0/RP0/CPU0:router(config-ug)# commit
What to Do Next
After completing configuration of a full set of user groups, configure individual users as described in the
"Configuring Users"
Configuring Users
Perform this task to configure a user.
Each user is identified by a username that is unique across the administrative domain. Each user should
be made a member of at least one user group. Deleting a user group may orphan the users associated with
that group. The AAA server authenticates orphaned users but most commands are not authorized.
SUMMARY STEPS
1.
2.
3.
4.
5.
OL-20382-01
section.
configure
username user-name
password {0 | 7} password
or
secret {0 | 5} secret
group group-name
Repeat Step
4.
for each user group to be associated with the user specified in Step
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
Purpose
—
Saves configuration changes.
When you issue the end command, the system prompts
•
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
–
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
–
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
•
changes to the running configuration file and remain
within the configuration session.
How to Configure AAA Services
2.
SC-23