Cisco CRS-1 - Carrier Routing System Router Configuration Manual page 164

How to Implement Keychain Management
Command or Action
Step 3
accept-tolerance value [infinite]
Example:
RP/0/RP0/CPU0:router(config-isis-keys)#
accept-tolerance infinite
Step 4
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-isis-keys)# end
or
RP/0/RP0/CPU0:router(config-isis-keys)# commit
Configuring a Key Identifier for the Keychain
This task configures a key identifier for the keychain.
You can create or modify the key for the keychain.
SUMMARY STEPS
1.
2.
3.
4.
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
SC-158
configure
key chain key-chain-name
key key-id
end
or
commit
Implementing Keychain Management onCisco IOS XR Software
Purpose
Configures a tolerance value to accept keys for the
keychain.
• Use the value argument to set the tolerance
range in seconds. The range is from 1 to
8640000.
Use the infinite keyword to specify that the
•
tolerance specification is infinite.
Saves configuration changes.
When you issue the end command, the system
•
prompts you to commit changes:
Uncommitted changes found, commit them
before exiting (yes/no/cancel)?
[cancel]:
Entering yes saves configuration changes to
–
the running configuration file, exits the
configuration session, and returns the
router to EXEC mode.
Entering no exits the configuration session
–
and returns the router to EXEC mode
without committing the configuration
changes.
Entering cancel leaves the router in the
–
current configuration session without
exiting or committing the configuration
changes.
Use the commit command to save the
•
configuration changes to the running
configuration file and remain within the
configuration session.
OL-20382-01