Cisco CRS-1 - Carrier Routing System Router Configuration Manual page 221

Implementing Secure Socket Layer on Cisco IOS XR Software
Command or Action
Step 5
enrollment url CA-URL
Example:
RP/0/RP0/CPU0:router(config-trustp)# enrollment
url
http://ca.domain.com/certsrv/mscep/mscep.dll
Step 6
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-trustp)# end
or
RP/0/RP0/CPU0:router(config-trustp)# commit
Step 7
crypto ca authenticate ca-name
Example:
RP/0/RP0/CPU0:router# crypto ca authenticate
myca
OL-20382-01
Purpose
Specifies the URL of the CA.
• The URL should include any nonstandard cgi-bin script
location.
Saves configuration changes.
When you issue the end command, the system prompts
•
you to commit changes:
Uncommitted changes found, commit them before
exiting (yes/no/cancel)?
[cancel]:
Entering yes saves configuration changes to the
–
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
–
returns the router to EXEC mode without
committing the configuration changes.
– Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
•
changes to the running configuration file and remain
within the configuration session.
This command authenticates the CA to your router by
obtaining the CA certificate, which contains the public key
for the CA.
When prompted, type y to accept the certificate.
•
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
How to Implement Secure Socket Layer
SC-215