Cisco CRS-1 - Carrier Routing System Router Configuration Manual page 12

Ios xr system security configuration guide
Hide thumbs Also See for CRS-1 - Carrier Routing System Router:
Table of Contents

Advertisement

Information About Configuring AAA Services
Task Groups
A task group is defined by a collection of task IDs. Task groups contain task ID lists for each class of
action.
Each user group is associated with a set of task groups applicable to the users in that group. A user's task
permissions are derived from the task groups associated with the user groups to which that user belongs.
Predefined Task Groups
The following predefined task groups are available for administrators to use, typically for initial
configuration:
User-Defined Task Groups
Users can configure their own task groups to meet particular needs.
Group Inheritance
Task groups support inheritance from other task groups. (Similarly, a user group can derive attributes
from another user group. See the
group B, the new set of attributes of task group A is the union of A and B.
Cisco IOS XR Software Administrative Model
The router operates in two planes: the administration (admin) plane and secure domain router (SDR)
plane. The admin (shared) plane consists of resources shared across all SDRs, while the SDR plane
consists of those resources specific to the particular SDR.
The root-system user has the highest level of responsibility for the router. This user provisions secure
domain routers and creates root SDR users. After being created, root SDR users take most of the
responsibilities from the root-system user for the SDR. Root SDR users in turn can create secure domain
router users. Root-system users and root SDR users have fixed permissions (task IDs) that cannot be
changed by users.
Each SDR has its own AAA configuration including, local users, groups, and TACACS+ and RADIUS
configurations. Users created in one SDR cannot access other SDRs unless those same users are
configured in the other SDRs.
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
SC-6
cisco-support: Cisco support personnel tasks
netadmin: Network administrator tasks
operator: Operator day-to-day tasks (for demonstration purposes)
root-lr: Secure domain router administrator tasks
root-system: System-wide administrator tasks
sysadmin: System administrator tasks
serviceadmin: Service administration tasks, for example, SBC
"User Groups"
section.) For example, when task group A inherits task
Configuring AAA Services on Cisco IOS XR Software
OL-20382-01

Advertisement

Table of Contents
loading

Table of Contents