Table Of Contents - Cisco CRS-1 - Carrier Routing System Router Configuration Manual

Release 3.6.0
Release 3.7.0
Release 3.8.0
Release 3.9.0
Contents
•
•
•
•
•
•
•
•
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
SC-80
Information was added about the use of object tracking in IPSec.
Information was added about new functionality that enables dynamically
learned routes in reverse-route injection to take precedence over static
routes.
Distance and route tag parameters were added to the reverse-route injection
feature.
The upper range value of the sa-id argument in the show crypto ipsec sa
and clear crypto ipsec sa commands was increased from 16500 to 64500.
Information was added about implementing IPSec in site-to-site and remote
VPN topologies.
Information, including examples, were added about the use of object
tracking in an IPSec-enabled network.
Some information was reorganized to increase readability.
No modification.
Information was edited to make clearer which features are supported on the
Cisco CRS-1 exclusively.
No modification.
Prerequisites for Implementing IPSec Network Security, page 81
Restrictions for Implementing IPSec Network Security, page 81
Information About Implementing IPSec Networks, page 81
Information About Implementing IPSec Networks, page 81
How to Implement General IPSec Configurations for IPSec Networks, page 85
How to Implement IPSec Network Security for Locally Sourced and Destined Traffic, page 97
Configuration Examples for Implementing IPSec Network Security for Locally Sourced and
Destined Traffic, page 101
Additional References, page 103
Implementing IPSec Network Security on Cisco IOS XR Software
OL-20382-01