Security Functions; Security Mode - Konica Minolta bizhub PRO 951 Specification & Installation Manual

Konica Minolta bizhub PRO 951
Specification & Installation Guide

Security Functions

Security Mode

The bizhub PRO 951 has two security modes.
Normal Mode
Use this mode when the machine is used by a single
person and there is low possibility of illicit access or
operation. This mode is already set as factory default.
To use the machine in normal mode, please refer to the
user's guides provided for each operation.
Enhanced Security Mode
Use the Enhanced Security mode when the machine
is connected to a local area network, or to external
networks through a telephone line or other means.
An administrator determined for the machine
management should follow the instructions in this guide,
so that users can have a safe operating environment.
To use the Enhanced Security mode, please contact
your service representative for the following settings.
A service representative should set a CE password
for CE authentication and administrator password
on the machine. The service representative uses the
CE password for CE works. The administrator, who
obtains the administrator password from the service
representative, uses that password to make settings
related to the Enhanced Security mode.
The administrator should never leak the administrator
password out to others.
The administrator who acquired the administrator
password manages the machine set up with the
Enhanced Security mode by making the following
settings.
• Turning on/off the Enhanced Security mode
• Adding/Changing registered users
• Deleting registered users
• HDD lock password
The administrator is also responsible in providing users
with the following instructions.
• Never leak his/her password out to others.
• Be sure to log out when completing the machine
operation after logging in upon the user
authentication.
Please be sure to use the Enhanced Security mode
to prevent unauthorized access to HDD.
With the Enhanced Security mode activated, the machine
displays a security icon
area of the touch panel.
The security icon will disappear when the Enhanced
Security mode is deactivated. If the administrator
accidentally deactivates the Enhanced Security mode,
please contact your service representative. You should
ask a customer engineer (CE) to check the security
environment and settings before activating the Enhanced
Security mode again.
Environment
Environment in which the Enhanced Security
Mode is Recommended
An environment where the machine is monitored by
a telephone line or a network.
Creating a Secure Environment
For security, we recommend that supervisors and an
administrator use the Enhanced Security mode and
establish an environment as follows.
• Qualifications to be an administrator:
selects a reliable person who has adequate
knowledge, technical ability, and experience as an
administrator, to whom to delegate administration
of the machine.
• Guarantee of customer engineer (CE):
A supervisor or an administrator can use the
Enhanced Security mode after confirming that
a service contract has been signed with a customer
engineer (CE). Clearly state in the service contract
that the customer engineer (CE) will not engage
in any fraudulent actions.
in the lower right
A supervisor
continued
23