Konica Minolta bizhub PRO 951 Specification & Installation Manual page 10

Konica Minolta bizhub PRO 951
Specification & Installation Guide
Component Considerations
Finisher FS-532
continued
Saddle Stitcher SD-510 (Equipped in Finisher FS-532)
10
continued
Staple
Dimensions
Weight
Power source
Power consumption
Type
Delivery modes
Fold & Staple
AU-202H AU-204H
Output trays Tray 1 (primary (main) tray)
AU-211P
Tray 2(secondary (sub) tray) cannot be used.
Paper size Min. 7.98" x 5.46" to Max. 13.00" x 19.17"*
*: Max. 12.56" (320 mm) in length for parallel
stapling (in the back).
Standard: 12" x 18"L, 11" x 17"L, 8.5" x 14"L,
8.5" x 11"L/P, 5.5" x 8.5"P, 13" x 19"L,
9" x 11"L, A3L, B4L, SRA4L/P, A4L/P, B5P,
A5P, Foolscap, SRA3L
Wide Paper
Custom: Min. 7.98" x 5.46" to Max. 12.76" x 19.17"
Tab Paper (only with the tab side ahead in output
direction)
Using Z-Fold in combination (finished size): Min.
8.25" × 5.46" to Max. 11.98" x 9.00"
Paper weight 14 to 80 lb. Bond
21.38"(W)* x 42.04"(D) x 28.40"(H) s(* 31.36 inches: including Tray 2)
When Post Inserter PI-502 mounted: 21.38"(W) x 28.4"(D) x 45.56"(H)
Approx. 163 lbs.
24 VDC ± 10%
144 W or less
Finishing equipment dedicated to the saddle-stitching function
Fold & Staple Output saddle-stitched sets.
Multi Output a sheet or set of paper folded in half.
Half-Fold
Multi Tri-Fold Output a sheet or set of paper folded in three.
Paper size Standard: 12" x 18"L, 11" x 17"L, 8.5" x 14"L,
8.5" x 11"L, A3L, B4L, A4L
Wide paper
Custom: Min. 4.72" x 9.43" to Max. 13.00" x 19.17"
Paper weight Body: 14 to 57 lb. Bond
Cover: 14 to 80 lb. Bond
Number of 25 sheets: 14 to 16 lb. Bond
sheets per 20 sheets: 17 to 22 lb. Bond
folded and 16 sheets: 23 to 24 lb. Bond
stapled set 5 sheets: 25 to 57 lb. Bond
A sheet of paper is normally counted as one for
14 to 57 lb. Bond paper, while a sheet should be
counted as five for 58 lb. Bond or heavier.
Staple 60 mm to 148.5 mm (pitch between 2 staples)
position
AU-202H AU-204H
AU-211P
continued