Konica Minolta bizhub PRO 951 Specification & Installation Manual page 13

Konica Minolta bizhub PRO 951
Specification & Installation Guide
Component Considerations
Post Inserter PI-502 (Mounts on FS-532 using Mount Kit MK-732)
Multi Puncher GP-501 (Uses Die Set DS-501 to DS-507)
Type Cover paper feeding equipment
AU-202H
Function Automatic
AU-211P
Manual
Paper sizes Upper tray
Lower tray
AU-202H
Paper type Plain, Recycled, Fine
Paper weight 14 to 53 lb. Bond
Stack capacity 200 sheets (22 lb. Bond) or within 30 mm thick for each of upper/
lower tray
Dimensions Post Inserter PI-502 only: 20.08"(W) x 24.36"(D) x 8.64"(H)
Weight Approx. 23.1 lbs. (Not including 6.61 lbs of Mount Kit MK-732)
Power source 24/5 VDC supplied from main body
Max. power consumption 30 W or less
Speed Up to 70 sheets per minute
Punch sheet size 8.5" x 11"P
Punch edge 11 inches
Paper weight 20 to 80 lb. Bond
Paper bypass mode Paper sizes and weights same as main body
sheet size
Punch capacity Single sheet
Power supply 115V, 60Hz, Single Phase
Electrical BTUs/Hour 1100BTU/HR
Watts 322W
Amps 2.8A
Safety TUV/GS, CE
Dimensions 12"(W) x 30.5"(D) x 40"(H)
Weight Approx. 170 lbs.
Shipping weight Approx. 270 lbs.
AU-204H
Feed paper into the finisher on receiving
a command from the main body.
Feed paper into the finisher on receiving
a command manually sent from the control
panel of the post inserter.
8.5" x 11"L/P, 5.5" x 8.5"P, A4L/P, B5L/P,
A5P, Wide Paper
Custom: Min. 7.17" x 5.47" to Max. 8.50" x 11.70"
12" x 18"L, 11" x 17"L, 8.5" x 14"L,
8.5" x 11"L/P, 5.5" x 8.5"P, A3L, B4L, SRA4L,
A4L/P, B5L/P, A5P, Foolscap, Wide Paper
AU-204H Custom: Min. 7.17" x 5.47" to Max. 12.36" x 18.03"
AU-211P
13