Tcp/Ip - Konica Minolta bizhub C25 Reference Manual

TCP/IP

TCP/IP (shown previous)
The [Network] - [TCP/IP] - [TCP/IP] window allows you to configure the fol-
lowing items. For more information on these TCP/IP, see chapter 8, "Net-
work Printing".
Item
[TCP/IP]
[Speed]
[LPD]
[SLP]
[LLMNR]
[Apply] button
[Clear] button
9-172
Description
Select whether or not to make a connection via TCP/IP.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration Menu Equivalent:
[UTILITY] - [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [TCP/IP]
Specifies the operating mode and speed for Ethernet.
Choices: [Auto], [10Base-T(Half)], [10Base-T(Full)],
[100Base-TX(Half)], [100Base-TX(Full)],
[1000Base-T(Full)]
Default: [Auto]
Configuration Menu Equivalent:
[UTILITY]- [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [SPEED/DUPLEX]
Select whether or not LPD is used.
Choices: [Enable], [Disable]
Default: [Enable]
Select whether or not SLP is used.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration Menu Equivalent:
[UTILITY]- [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [SLP]
Select whether or not LLMNR is used.
Choices: [Enable], [Disable]
Default: [Enable]
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Configuring the Printer