Konica Minolta bizhub C25 Reference Manual page 163

–
–
–
–
–
–
–
–
–
6
Restart the printer (turn the printer off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection column,
check that the created Pserver is connected.
3-8
NetWare Print: Select [Enable].
Frame Type:
Select [Auto]. (Select the frame type according to the network
environment.)
Mode: Select [PServer].
Print Server Name: Specify the print server name created in step
4.
Print Server Password: Specify only when setting from the
NetWare server.
Print Queue Scan Rate: Specify 1. (Change as necessary.)
Bindery/NDS: Select [NDS].
Preferred NDS Context Name:
Specify the name of the context that connects to Pserver.
Preferred NDS Tree Name:
Specify the name of the tree that Pserver logs on to.
Printing With NetWare