Installation Notes - Baumatic AS6.1 User And Installation Instructions Manual

INSTALLATION INSTRUCTIONS

INSTALLATION NOTES

1 Cut the aperture to the dimensions shown in the table below or use the template provided on
the packaging.
2 Invert the hob and apply the sealing agent provided to match the outer perimeter edge.
3 If the sealing agent is a strip type, the protective covering must be removed from both sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface if
repairs are required.
4 Insert the appliance into the aperture and fix into position via the clamps & screws, tightening
the screws evenly (see Fig.3).
HOB APERTURE DIMENSIONS
MODEL A B
AS6.1 685 510 655 480 40
B12 580 510 560 490 40
B13 580 510 560 490 40
B14 580 510 560 490 40
B15 580 510 560 490 40
B16 770 510 750 490 40
Fig.3
C D E
9