Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
INSTALLATION NOTES
1
Cut the aperture to the dimensions shown in the table below or use the template provided on
the packaging.
2
Invert the hob and apply the sealing agent provided to match the outer perimeter edge.
3
If the sealing agent is a strip type, the protective covering must be removed from both sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface if
repairs are required.
4
Insert the appliance into the aperture and fix into position via the clamps & screws, tightening
the screws evenly (see Fig.3).
HOB APERTURE DIMENSIONS
MODEL
A
B
AS6.1
685 510 655 480 40
B12
580 510 560 490 40
B13
580 510 560 490 40
B14
580 510 560 490 40
B15
580 510 560 490 40
B16
770 510 750 490 40
Fig.3
C
D
E
9
Hide quick links:
Advertisement
Table of Contents
