Baumatic AS9.1AL VALV-B72TCBL- B77TCBL-B40-B78 User And Installation Instructions Manual page 7

INSTALLATION NOTES
1. Cut the aperture to the dimensions shown below or use the template if printed on the
packaging.
2. Invert the Hob and apply the sealing agent provided to match the outer perimeter edge.
3. If the sealing agent is a strip type, the protective covering must be removed from both sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface if
repairs are required.
4. Insert the appliance into the aperture and fix in position via the clamps & screws, tightening
the screws evenly (see Fig. 1 below).
5. If the appliance is to be installed in a Leisure Accommodation Vehicle, the requirements of
EN 721 must be applied.
HOB APERTURE DIMENSIONS
MODEL A
B72TCBL 580 510 565 480 50
B77TCBL 680 510 560 480 50
B78 680 510 560 480 50
AS9.1AL VALV 680 510 560 480 50
B40
7
B C D E
Fig. 1