Table of Contents
Related Manuals for Baumatic PHG602
Summary of Contents for Baumatic PHG602
- Page 1 B70.1BL 60 cm 4 Burner glass gas hob with thermocouples PHG602 60 cm 4 Burner glass gas hob with thermocouples B77TCBL 70 cm 5 Burner gas glass hob with thermocouples. B72BL 60 cm 4 Burner glass gas hob B77BL 70 cm 5 Burner glass gas hob...
- Page 2 User Manual for your Baumatic B70.1BL 60 cm 4 Burner gas glass hob with thermocouples PHG602 60 cm 4 burner gas glass hob with thermocouples B77TCBL 70 cm 5 burner gas glass hob with thermocouples B72BL 60 cm 4 burner gas glass hob...
-
Page 3: Table Of Contents
Contents Environmental note Important safety information 5 – 7 Specifications 8 – 14 B70.1BL PHG602 B77TCBL B72BL B77TCBL Electrical details Gas details Gas hob surface layout 13 - 14 Using the gas hob 15 - 16 Before first use Switching the hob on... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made... - Page 6 Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowe to touch the applianc e at any time. During and after use, all surfaces will be hot. o If it is necessary for younger family members to be in the...
- Page 7 British Standards. Please see the specific ection of this booklet that refers to installation. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a r esult of improper use or installation of this appliance.
-
Page 8: Specifications
pecifications .1BL Product dimensions: Aperture dimensions: Height: 510 mm Height: 490 mm Width: 580 mm Width: 560 mm Depth: 50 mm Product specifications: o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burne o 1 x 1.00 kW auxiliary burner o Side control operation Automatic ignition o Flame failure safety device... -
Page 9: Phg602
HG602 roduct dimensions: Aperture dimensions: Height: 510 mm Height: 490 mm Width: 580 mm Width: 560 mm epth: 50 mm roduct specifications: o 1 x 3.50 kW rapid burner o 2 x 1.75 kW semi-rapid burne 1 x 1.00 kW auxiliary burner o Front control opera tion o Automatic ignition... -
Page 10: B77Tcbl
77TCBL roduct dimensions: Aperture dimensions: Height: 510 mm Height: 490 mm Width: 680 mm Width: 562 mm epth: 50 mm roduct specifications: o 1 x 3.50 kW wok burner o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burne 1 x 1.00 kW auxiliary burner o Front control opera tion... -
Page 11: B72Bl
72BL roduct dimensions: Aperture dimensions: Height: 510 mm Height: 490 mm Width: 580 mm Width: 560 mm epth: 50 mm roduct specifications: o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burne 1 x 1.00 kW auxiliary burner o Front control opera tion o Automatic ignition... -
Page 12: B77Tcbl
77BL roduct dimensions: Aperture dimensions: Height: 510 mm Height: 490 mm Width: 680 mm Width: 562 mm epth: 50 mm roduct specifications: o 1 x 3.50 kW wok burner o 1 x 3.00 kW rapid burner o 2 x 1.75 kW semi-rapid burne 1 x 1.00 kW auxiliary burner o Front control opera tion... -
Page 13: Electrical Details
lectrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 3 A (double pole sw itched fused outlet with 3mm contact gap) Max Rated Inputs: 0.008 to 0.02 kW (depending on model) ains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked) as details Connection: Rp ½... - Page 14 72BL/PHG602 77BL/B77TCBL...
-
Page 15: Using The Gas Hob
sing the gas hob Before first use IMPORTANT: You should clean the hob surface (see “ Cleaning and maintenance” section). Switching the hob on The following s ymbols will appear on the control panel, next to each control knob: 0 = gas off arge flame: maximum setting mall flame: minimum setting o The minimum setting... -
Page 16: Automatic Ignition With Flame Failure Safety Device
In case of power failure, the burners can be lit by carefully using a match. Automatic ignition with flame failure safety device (B70.1BL/PHG602/B77TCBL) The appliance is fitted with a flame failure safety device on each burner, which is designed to stop the flow of gas to the burner head in the event of the flame going out. -
Page 17: Cleaning
o The burner flame must never extend beyond the diametre of the pan. o Use flat bottomed pans only o When possible, keep a lid on the pan whilst cooking. o Cook vegetables with as little water as possible, to reduce cooking times. -
Page 18: After Each Use
After each use o Remove the pan stands and wipe the appliance over with a soft, damp cloth that has been put into warm soapy water. The cloth should be wrung out after being taken out of the soapy water. o Dry the appliance by rubbing the surface with a soft, clean cloth. -
Page 19: Installation
IEE Wiring Regulations o Electricity at Work Regulations BS 6172 o Installation of Domestic Gas Cooking Appliances (if necessary, BS 5482 Installation of Domestic LPG Appliances) o BS 5440 Installation of Flues and Ventilation for Gas Appliances o Baumatic Ltd Installation Instructions... -
Page 20: Positioning
Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is located in, during periods of use. o This appliance can be located in a kitchen, a kitchen diner or a bed sitting room. -
Page 21: Unpacking The Appliance
When unpacking the appliance please check that the following items are contained within the packaging: 1 x Baumatic hob 4 x Pan stands (B70.1BL/PHG602/B72BL) 5 x Pan stands (B77BL/B77TCBL) 1 x Installation and instruction manual 1 x Baumatic guarantee card... - Page 22 o Cut a hole in the worktop that corresponds with the drawings shown on page 21. o IMPORTANT: You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it. o Carefully turn the hob upside down and place it on a cushioned mat.
-
Page 23: Gas Connection
Conversion for use on LPG and other gases must only be undertaken by a qualified person. For information on the use of other gases, please contact the Baumatic Advice Line. o The cooker must be installed by a qualified person, in... -
Page 24: Ventilation Requirements
Ventilation requirements o The room containing the hob should have an air supply in accordance with the current edition of BS 5440: Part 2: o The room must have opening windows or equivalent; some rooms may also require a permanent vent. o If the room has a volume between 5 and 10m³, it will require an air vent of 50cm²... -
Page 25: Gas Safety (Installation And Use) Regulations
Gas Safety (Installation and Use) Regulations IMPORTANT: The appliance MUST be connected to the gas supply by use of a ½ BSP Elbow, seal, copper pipe and an isolation tap fitted in an easily accessible position. o It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the Gas Safety Installation and Use Regulations. -
Page 26: Gas Adjustment (Conversion To Lpg)
Gas adjustment (Conversion to LPG) All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. o Remove the pan-stands, burners and flame spreaders (A). -
Page 27: Minimum Flow Adjustment For Hob Gas Taps
o IMPORTANT: The minimum flow adjustment process must be completed before the appliance is next used. Minimum flow adjustment for hob gas taps. All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. -
Page 28: Gas Tap Maintenance
Gas tap maintenance These maintenance operations MUST ONLY be carried out by a CORGI registered engineer. IMPORTANT: Before carrying out any maintenance operations, disconnect the appliance from the gas and electricity supplies. If a gas tap becomes stiff to operate, then you should proceed as follows: o Remove the control knobs, pan supports, burners, hob fixing screws and clamps. -
Page 29: Electrical Connection
Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at the control switch. -
Page 30: My Appliance Isn't Working Correctly
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the... -
Page 31: Contact Details
Czech Republic United Kingdom Baumatic CR spol s.r.o. Baumatic Ltd., Amperova 495 Baumatic Buildings, 46215, Librec 6 Bennet Road, Czech Republic Reading, Berkshire RG2 0QX +420 800 185 263 United Kingdom www.baumatic.cz Sales Telephone (0118) 933 6900 Slovak Republic Sales Fax Baumatic Slovakia, s.r.o.
Need help?
Do you have a question about the PHG602 and is the answer not in the manual?
Questions and answers