Change the setting using TMNet WinConfig V3 (USB connection)
Connect the UB‐R03 to the setting computer with the USB connection, and change the setting
from TMNet WinConfig V3.
This method is similar to the initial setting procedure. It is suited for setting with other networks
because the connection with the UB‐R03 is not cut.
Changing method
For the details of the changing method, refer to ʺSetting using the USB connectionʺ on page 26.
Confirm after changing
After changing of the setting, boot the Web browser of the computer on the network and enter
the IP Address of the UB‐R03 in the address bar.
For the details of the confirm, refer to ʺConfirm after changingʺ on page 49.
50