Epson C32C824461 - UB R03 Print Server Technical Reference Manual page 72

3
Execute the arp command and relate the IP Address for setting the UB-
R03 to the Mac Address of the UB-R03.
Input following format from the command line.
arp -s [IP Address] [Mac Address]
Example: using Windows
arp: -s 192.168.192.168 00-00-48-01-23-45
4
Execute the PING command and set the IP Address.
Example: ping 192.168.192.168
5
When the PING command succeeds, the following messages are
displayed. (The value of Time is changed.)
Reply From 192.168.192.168: Bytes=32Time<10ms TTL=255
6
Confirm that the IP Address is 192.168.192.168.
72
The execution of the ARP command and the execution of the PING command
must be executed within about two minutes. If it takes over two minutes, execute
the command from step 3 again.
The Mac address can be confirmed from the Dynamic Status Sheet.
(For the printing of the Dynamic Status Sheet, refer to the
"Printing a Dynamic Status Sheet" on page 38.)