Product Information
Parts Name and Function
Connector to printer
RF module
Push button
A push button is provided to perform the following functions.
• Status sheet printing
Push and hold the push button for three seconds or more when the TM printer is ready for
printing (paper is set and the power supply is turned on); the network parameter status is
printed.
• Setting initialization
Push and hold the push button and while turning on the power supply. Keep pushing the
push button (about ten seconds) until the initialization start massage (Resetting to Factory
Default) is printed. All settings are reset to the factory settings.
USB connector (Parameter Setting)
The UB‐R03 has a USB connector to set the internal parameters.
• To be connected with a USB cable to the computer on which the dedicated utility
(TMNet WinConfig V3) is installed to set the internal parameters.
The USB connector can be used only for setting the network parameter. The USB connector
cannot be used other purposes, such as printing.
Chapter 1 Product Overview
Antenna
Push button
USB connector
(Parameter Setting)
1
19