Alarm Lock Trilogy DL2800 Programming Instructions Manual page 25

Programming Functions (cont'd)
QUICK SCHEDULES
Quick Schedules - Enable Group
For your convenience, your lock comes pre-programmed with Quick Schedules, which, when programmed, enable
Groups for popular blocks of time. Group members will be enabled during the blocks of time defined below, but will still
need to enter their User Codes into the keypad to unlock the lock.
•
Group number must be 1-4; enter the number of the Group that is to be enabled for the time specified by the Quick
Schedules below.
Note: These Quick Schedules can only be programmed through the keypad (not through DL-Windows), and existing
Quick Schedules will be over-written by schedules downloaded from DL-Windows. Therefore, after downloading any
DL-Windows schedules, be sure to re-program your Quick Schedules into your Lock Program.
84. Business Quick Schedule
7AM-5PM, Monday - Friday
85. Day Quick Schedule
7AM-5PM, All days
86. Evening Quick Schedule
3PM-1AM, All days
87. Night Quick Schedule
11PM-9AM, All days
SCHEDULES GROUP 1 ACTIVATED
Scheduled Passage Mode (Group 1 Activated)
Functions 88 and 89 allow you to set up a window of time where if any Group 1 User Code is entered
within this window, Passage Mode will be activated, allowing anyone to enter. Note: This feature can
only be programmed using the lock keypad. For additional information, see Group 1 Activated Features
on page 27.
• For the day enter: 1 for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for Thursday, 6 for
Friday, 7 for Saturday, 8 for Monday to Friday, 9 for Saturday and Sunday, and 0 for all days of week.
• Enter time of day in 24 hour format (for example, for 2:15 PM, enter 14:15).
88. Passage Mode
(Open Time Window)
89. Passage Mode
(Close Time Window)
[ _ ]
; 8 4 ;
(Group)
[ _ ]
; 8 5 ;
(Group)
[ _ ]
; 8 6 ;
(Group)
[ _ ]
; 8 7 ;
(Group)
[ _ ]
; 8 8 ;
(Day)
[ _ ]
; 8 9 ;
(Day)
:
:
:
:
3
[ _ _ _ _ ]
; :
(Time)
[ _ _ _ _ ]
; :
(Time)
3
25