SETTING THE DAYLIGHT SAVING TIME
SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME
Ex: Daylight saving time ends on Sunday, November 4, 2007.
S
1
tep
Year
SELECT
SELECT
S
2
tep
SELECT
S
3
tep
SELECT
S
4
tep
17
Date
Month
Press the SELECT button and position
the
At that moment, the "Year" flashes.
D.S.T.
END
CHANGE
SET
Change the "Year"
In case of the example, press the
CHANGE button to set at "07". And
then press the SET button.
At that moment, the flashing
D.S.T.
changes from "Year" to "Month".
END
CHANGE
SET
Change the "Month"
Press the CHANGE button to set at
"11".
And then press the SET button.
At that moment, the flashing
D.S.T.
changes from "Month" to "Date".
END
CHANGE
SET
Change the "Date"
Press the CHANGE button to set at
"4".
And then press the SET button.
D.S.T.
END
CHANGE
SET
After you finish setting the ending date
of D.S.T., press the SET button once
again.
Now the ending date of D.S.T. setting
has been completed. Replace the cover
and lock.
Important: Printing will not occur unless
Step 4 is completed.
over the "D.S.T. END".